Danby SBWC033A1S - Manuel (Page 10)

Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this trou-
bleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or
Danby’s Toll Free Number 1-866-726-1150 for assistance.
PROBLEM POSSIBLE CAUSE SOLUTION
9
TROUBLESHOOTING
1) No power
2) Cabinet temperature too
high
3) Condensation on the
cabinet and/or doors
• A fuse in your home may be
blown or a circuit breaker
tripped.
• Power surge.
• Plug is not fully insterted into
wall outlet.
• Wrong temperature setting.
• Door not shut properly or
opened excessively.
• Interior lights toggled on.
• Recently added large
quantity of warm bottles to
cabinet.
• High humidity conditions in
the home.
• Replace fuse or reset circuit
breaker.
• Unplug the wine cooler, wait a
few seconds and plug back in.
• Make sure the 3-prong plug is
fully inserted into outlet.
• Verify the temperature control
setting; adjust if necessary.
• Ensure door is fully closed and
the gasket is sealing against
the cabinets. Open door only
as needed and for short
periods of time.
• The interior lights are intended
for temporary lighting of
cabinets for display purposes
only. They are not intended to
be left on for prolonged periods
of time.
• Limit quantity of warm bottles
introducted at the same time.
Stagger the load introduction if
possible.
• Ensure door is fully closed and
gasket is sealing against the
cabinet. Open the door only as
needed and for short periods of
time.