Assembling wheels – Bumbleride Queen B Manuel d'utilisation
Page 5
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
OPENING PRAM
Unfold and extend the chassis by pulling up on the handlebar [1].
Ensure that the chassis locks and clicks into position [2].
fi
* ♦
3s
WARNING; Always verify that the main locking devices are engaged
correctly before using your pram.
ASSEMBLING WHEELS
Attach the wheels by squeezing the hubcap release button and sliding wheel
onto the axle as far as it can go [1].
Release button so wheel clicks into position and pull on the wheel to ensure it is
securely attached to the axle.
Locate the pull lever on the front left side of the pram to lock the steerable wheels.
Push the lever down and move to the desired setting. Release lever to click into
place C2].
To remove wheels, squeeze hubcap release button and slide wheel off of axle.
WARNING: Pull on each wheel to ensure that it is locked before use.