Traxxas 6509X TQi 2.4GHz - Manuel (Page 5)

TQ i RADIO SYSTEM • 5
GETTING STARTED
Models: All 1/16th Scale Models; E-Revo BE; E-Revo; Revo;
Revo 3.3; Raptor; Slash 4X4 Series; Slash Series; Telluride 4X4;
Slayer; Stampede 4x4 Series; Summit; T-Maxx 3.3, Traxxas Rally
Profile 1
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn the
Transmitter
ON
Release MENU and
SET; red LED blinks
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Models: Bandit; Bandit VXL; Blast; E-Maxx BE; E-Maxx;
Rustler; Rustler VXL; Spartan; Stampede; Stampede VXL;
Nitro Stampede; Nitro Sport; Villain EX; XO-1
Profile 2
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn the
Transmitter
ON
Release MENU and
SET; red LED blinks
x 2
Press MENU;
red LED blinks (x2)
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Models: Jato; Jato 3.3
Profile 3
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn the
Transmitter
ON
Release MENU and
SET; red LED blinks
x 3
Press MENU twice;
red LED blinks (x3)
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Models: Nitro 4-Tec 3.3; Nitro Rustler; Blast
Profile 4
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn the
Transmitter
ON
Release MENU and
SET; red LED blinks
x 4
Press MENU three times;
red LED blinks (x4)
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Models: T-Maxx 3.3; T-Maxx Classic; S-Maxx
Profile 5
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn the
Transmitter
ON
Release MENU and
SET; red LED blinks
x 5
Press MENU four times;
red LED blinks (x5)
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Model: Traxxas Funny Car
Profile 6
Turn the
Transmitter
OFF Hold both MENU
and SET
Turn the
Transmitter
ON
Release MENU and
SET; red LED blinks
x 6
Press MENU five times;
red LED blinks (x6)
Press SET to clear settings. LED
will turn solid green. Transmitter
is restored to the default
settings for the listed models.
Selecting Your Model Profile (Resetting to Defaults)
The TQi radio system has been programmed with servo reversing profiles for use with current Traxxas models. Find your model on this chart and follow the steps
to set the default transmitter settings for your model. The settings for servo direction will be set, but you may need to adjust the trim and endpoint settings for the
steering and throttle channels. Should you ever need restore your transmitter to the default settings for your model, use the steps described in this chart.
Using the Traxxas TQi Radio System
with non-Traxxas Models
The TQi radio system can be used with all popular servos in any hobby-
grade R/C vehicle. From the factory, the transmitter is set for Profile 1,
with each channel set as “reversed.” The chart to the right indicates the
direction the servos will operate. Follow the instructions on page 14 if
you need to change these setting(s) to suit your model.
*Model 6507X only
Channel 1
Steering
Channel 3*
Rocker Switch
Channel 2
Throttle/Brake
Channel 4/5*
3-Position Switch
Ch. 4 Ch. 5
x 2
x 1
x 3
x 4
x 5