Cisco 4500 Manuel d'utilisation
Accessoires d'ordinateurs Cisco

Americas Headquarters:
© 2001–2010 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Regulatory Compliance and Safety Information
for the Catalyst 4500 Series and Catalyst 4500
E-Series Switches
Revised: June 15, 2010
Product Numbers:
This document provides international agency compliance, safety, and statutory information for the
Catalyst 4500 series, the Catalyst 4500 E-series switches, and the Catalyst 4500 series modules. Read
this document before installing or servicing the systems:
Note
Only trained and qualified service personnel (as defined in IEC 60950-1 and AS/NZS 60950-1) should
install, replace, or service the equipment. Install the system in accordance with the U.S. National Electric
Code if you are in the United States.
WS-C4003(=)
WS-C4006(=)
WS-C4503(=)
WS-C4506(=)
WS-C4507(=)
WS-C4510(=)
WS-C4503-E(=)
WS-C4506-E(=)
WS-C4507R-E(=)
WS-C4510R-E(=)
Document Outline
- Regulatory Compliance and Safety Information for the Catalyst 4500 Series and Catalyst 4500 E-Series Switches
- Contents
- Translated Safety Warnings
- Statement 43-Jewelry Removal Warning
- Statement 258-Fan Tray Removal Warning
- Statement 328-Main Ground Connection Warning
- Statement 1001-Work During Lightning Activity
- Statement 1002-DC Power Supply
- Statement 1003-DC Power Disconnection
- Statement 1004-Installation Instructions
- Statement 1006-Chassis Warning for Rack-Mounting and Servicing
- Statement 1008-Class 1 Laser Product
- Statement 1017-Restricted Area
- Statement 1019-Main Disconnecting Device
- Statement 1021-SELV Circuit
- Statement 1022-Disconnect Device
- Statement 1023-No. 26 AWG
- Statement 1024-Ground Conductor
- Statement 1025-Use Copper Conductors Only
- Statement 1026-WAN Port Static Shock
- Statement 1028-More Than One Power Supply
- Statement 1029-Blank Faceplates and Cover Panels
- Statement 1030-Equipment Installation
- Statement 1031-EU Public Network Port
- Statement 1032-Lifting the Chassis
- Statement 1034-Backplane Voltage
- Statement 1036-Telephone Jacks in Wet Locations
- Statement 1037-Uninsulated Wires or Terminals
- Statement 1040-Product Disposal
- Statement 1041-Disconnecting Telephone-Network Cables
- Statement 1045-Short-circuit Protection
- Statement 1046-Installing or Replacing the Unit
- Statement 1051-Laser Radiation
- Statement 1057-Hazardous Radiation Exposure
- Statement 1074-Comply with Local and National Electrical Codes
- European Directives
- Standards Compliance
- EMC Environmental Conditions for Products Installed in the European Union
- EMC Class A Notices and Warnings
- GR-1089-CORE Issue 3 Documentation Statements
- GR-1089-CORE Issue 4 Documentation Statements
- Statement 7001-ESD Mitigation
- Statement 7005-Intra-building Lightning Surge and AC Power Fault
- Statement 7012-Equipment Interfacing with AC Power Ports
- Statement 7013-Equipment Bonding Networks
- Statement 7014-Installation Location
- Statement 7015-Equipment Bonding and Grounding
- Statement 7016-Battery Return Conductor
- Statement 7017-Minimum Steady State DC Input Voltage
- Telecom Approvals Listing
- Japanese Electric Appliance and Radio Laws
- Obtaining Documentation and Submitting a Service Request