Whirlpool Dishwasher - Manuel (Page 10)

To change door color panel
(For models so equipped)
1. Push up at each end of the trim piece at bottom of
door panel. Then pull trim piece toward you. Set trim
piece aside.
5. Insert trim piece to cover lower edge of frame. Snap trim
piece into place.
2. Use one hand to push door panel(s) up. Use other hand
to bow bottom edge of door panel(s). Remove panel from
door. Do Not remove spacer panel.
6. Press down firmly along the length of trim piece to check
that trim piece is secure.
3. Bow the panel with desired color facing out and insert
into door frame. Slide top of panel(s) and spacer panel
up under edge of control console.
Control console
To change access color panel
(For models so equipped)
1. Push up at each end of the access panel top trim with
thumbs to unsnap trim. Remove the top trim and set it
aside.
Slide top
of panels
and spacer
under control
console.
4. Lift door panel(s) and spacer panel up and hold with one
hand. Check that both color panel(s) and spacer panel
are above the lower frame.
2. Hold the top of the color panel and bow it slightly. Slide
(continued)
3369671-c 1 0