Panasonic CQ-VX777EUC - Manuel (Page 43)

Tone Quality Adjustment/HEQ Setting
O SEL,0 A,V,<,>,0 SPC, © preset 1,©
preset 2 button
1. HEQ Switching
Equalizer modes change as follows each time
SEL is pressed.
Normal Mode (VOL) HEQ GEQ BAL/FAD
i 1
Preout *- DRCG ^ SBC/SBC-SW Position
2. Selecting Desired Tone Quality
Select a desired tone quality using A, V, <, >.
With the center fixed flat, any of the 49 equaliz­
er patterns, arranged in vertical and horizontal
directions, can be selected.
3. Selecting Desired Sound Field Effect
Press SPC to select a desired sound field
effect.
1. Press 1 to narrow the sound field
{steps 1 to 3).
2. Press 2 to widen the sound field
(steps 1 to 3).
GEQ Setting
© SEL,© A,V,<,>
• Press SEL to select GEQ mode.
• Press >, < (frequency up/down) to select a
frequency.
• Press A to raise the level.
Press V to lower the level.
• k _____________________ _________________________ _____________ _____________________________ ____
GEQ Memory
O SEL, © operation buttons , 0 SPACE ,©
preset 1, 0 prese 2, 0 preset 3,0 preset 4 ,
0 preset 5,0 preset 6
1. Select GEQ.
2. Select a desired equalizer characteristic.
3. Press one of the memory buttons for more
than 2 seconds.
4. The preset number flashes, indicating that the
selected equalizer characteristic has been
saved in the memory.
^
GEQ Memory Recall
0 SEL, 0 operation buttons, 0 SPACE ,0
preset 1, 0 prese 2,0 preset 3,0 preset 4 ,
0 preset 5,0 preset 6
1. Press SEL to select GEQ.
2. Press one of the memory buttons.
TUNER (RADIO)
Selecting Tuner Mode
O AM/FM button
If the mode is other than tuner mode, press this
button to change it to tuner mode.
---------- ■■ ■ ^
Switching Bands
O
AM/FM button
The AM and FM bands change alternately each
time this button is pressed.
Tuning (Manual)
0 ATUNE.0TUNEV
Press A to raise the frequency.
Press V to lower the frequency.
— -
Automatic Seek
0 ATUNE,0TUNEV
When either of these buttons is pressed for more than 0.5
second, the frequency changes till a station is tuned in to,
where the frequency stops automatically. Repeat it till a
desired station is received.
^^
Preset Tuning
0 preset 1,0 prese 2,0 preset 3,0 preset
4,0 preset 5,0 preset 6
When one of the buttons 1 to 6 preset in the
memory is pressed, the corresponding preset
station is tuned in to.
Preset Memory
O AM/FM, 0 ATUNE, 0 TUNEV, 0 preset
1, 0 prese 2,0 preset 3,0 preset 4,0 pre­
set 5 ,0 preset 6
(D Band Switching
Press AM/FM to select the AM or FM band
as desired.
(D Tuning
Press A TUNE or TUNE V to tune in to a desired
station.
@ Preset Button Memory
After tuning in to a desired station by steps ©
and © above, press one of the preset buttons 1 to
6 for 2 seconds so the frequency indicator flashes.
It indicates that the station has been preset in the
memory. Repeat it from FM1 to AM2.
^
Auto Preset Memory
O AM/FM, 0 ATUNE, 0 TUNEV, 0 preset
S' 1, 0 prese 2,0 preset 3,0 preset 4 , U pre­
set 5 ,0 preset 6
• When AM/FM (AUTO PRESET) is pressed for more
than 2 seconds, frequency search begins with the
lowest of the frequencies on the band being
received, and up to 6 stations are automatically
stored in the preset memory in the order of signal
intensity.
• After search, the preset stations are received for 5
seconds each in order.
• When you find a station you wish to listen to, press the
corresponding button among preset buttons 1 to 6.
CQ-VX777EUC
43