Panasonic CCTV CAMERAS WV-BP132 Manuel d'utilisation
Page 7
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
![background image](/manuals/653791/7/background.png)
0 Lens Type and Drive Signal Selector (ALC
(VIDEO/DC), ELC)
Lets you select the mode according to the lens
type that is used with this camera.
ALC: Lets you select this mode when an auto iris
lens {ALC lens) is used with this camera.
ELC: Select this mode when a fixed iris lens or
manual iris lens is used with this camera.
If you have selected ALC select the mode accord
ing to the type of auto iris lens drive signal to be
supplied to the lens from the auto iris lens connec
tor.
VIDEO: Select this mode if you are using the auto
iris lens that requires a video drive signal.
DC: Select this mode If you are using the auto Iris
lens that requires a DC drive signal.
(D Auto Iris lens Connector
This connector is for connecting the auto iris lens
by a 4-pin male connector supplied as a standard
accessory (Part No. YFE4191J100).
d) Camera Mounting Screw Hole
This hole is for mounting the camera onto a mount
ing bracket.
® Flange-back Adjusting Ring
This ring adjusts the back focal length or picture
focus. Rotate this ring clockwise for a C-mount
lens or counterclockwise for a CS-mount lens.
(D Lens (option)
(D
Power Cord (only WV-BP130)
Connect this power cord to an electrical outlet of
120V AC 60 Hz.
® DC12 V Input Terminal (DC 12V IN (only WV-
BP132))
This terminal is for connecting the 12V DC power
supply cord.
® 24V AC Input Terminal (AC 24V IN (only WV-
BP134))
This terminal is for connecting the AC 24V 60 Hz
power supply cord.
® Video Output Connector (VIDEO OUT)
This connector is for connecting with the VIDEO IN
connector of the monitor.
-
5
-