Preparing the remote control power supply, Insert the battery, Replacing the button-type battery – Panasonic DVD-PA65 Manuel d'utilisation
Page 10: Operation range, Preparing the remote control, Using the ac adaptor
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Preparing the remote control Power supply
Insert the battery
(Lithium battery)
■ Replacing the button-type battery
The battery normally lasts for about a year.
Replace if the remote control fails to oper
ate the unit when used within the operation
range.
Refer to “PRECAUTIONS” on pages 6 and 7.
Operation range
30“ 30
Remote control
'signal sensor
About 7 m
(23 feet) in
front of the
signal sensor
OOOD
iP.’PP-g:
oooit
oooo
•Do not expose the remote control signal
sensor to bright light,
•Do not place obstacles between the re
mote control signal sensor and the re
mote control.
•Do not use another unit’s remote control
at the same time.
Using the AC adaptor
^ py.ftiFzi: Front of thi this unit
Refer to “PRECAUTIONS” on page 6.
The unit is in the standby condition (the
[(!)] indicator lights) when the AC power
supply cord is connected. The primary
circuit is always “live” as long as the AC
adaptor is connected to an electrical
outlet.
■ When the unit is not going to be used
for a long time
The unit consumes 2 W when in standby
mode.
To conserve power, disconnect the AC
power supply cord from the AC outlet.
RQT5603