Panasonic WV-BF300 - Manuel (Page 2)

FEATURES
• Unobtrusive Passive Infrared Sensor hous­ • Signal-to-noise ratio of 46 dB with AGC off
ing design
• Horizontal resolution of 330 lines for WV-
CF400 or 380 lines for WV-BF300
• Minimum illumination of 42 lx (4.2 foot-can­
dle) for WV-CF400 or 2.1 lx (0.21 foot-can­
dle) for WV-BF300
• Exclusive lens is provided
PRECAUTIONS
1. Do not attempt to disassemble the
camera.
To prevent electric shock, do not remove
screws or covers.
There are no user serviceable parts inside.
Ask a qualified service person for servic­
ing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking,
shaking, etc. The camera could be dam­
aged by improper handling or storage.
3. Do not expose the camera to rain or
moisture, or try to operate it in wet
areas.
Turn the power off immediately and ask a
qualified
service person for servicing.
'Moisfure can damage the camera and also
create the danger of electric shock,
4. Do not use strong or abrasive
detergents when cleaning the camera
body.
5. Clean the lens with care.
Do not dean the lens with strong or abra­
sive detergents. Use lens tissue or a cot­
ton tipped applicator and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera at bright objects.
Whether the camera is in use or not, never
aim it at the sun or other extremely brght
objects. Otherwise, blooming or smear
may be caused.
7. Do not operate the camera beyond the
specified temperature, humidity or
power source ratings.
Use the camera under conditions where
temperature is between -10“C - +50°C
(14°F - 122“F), and humidity is below 90
%.