To install the removable face plate – Panasonic DF66EUC Manuel d'utilisation
Page 29
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

0 As shown in Fig.3, gently push the lower side of the case and open its cover. Keep the removable
face plate in the case. Then, you can bring the plate safety.
Fig.3
To install the Removable Face Plate
0 Fit either the edge of right or left holes in the face plate over the main unit’s pin, and fit it over on
the other side while pushing it.
Fig. 4
Security Indicator
(D After fitting the face plate holes, move the face plate up and down a few times to make sure that it
has been fitted securely.
Contact
0 Close the front panel and press the right side of face plate until "click" is heard.
Caution:
v
\
; /-A
^
1. Beforefempvirig the rernovàblefacé:pÌatè, rhake sure the power is off, ;
2. this removable face plate is not water-proof. Do not expose it to water or excessive moisture.
3. Do hot rernove the rerhOvable face plate; while Oriying your car.^ z;
4. Do not place tfie removable face; plate on the dashboard of nearby areas where the tempera
ture rises to high levels.
1
5. Dp not touch the contacts on the removable face plate or on the main unit, since this may result
in poor electrical cxintacts.
6. If dirt or other foreign substances get on the contacts, wipe them with a cléarì, dry cloth. .
7. Don’t appiy any strong downward force onto the face plate being open or it rfiight be darriaged.
FB6/DF44EU
29