Radio basics continued, Mono/local selection, Preset station setting – Panasonic Removable Full Front High-Power CD Player/Receiver with Changer Control CQ-DPX95EUC Manuel d'utilisation
Page 12: Manual station preset, Tuning in a preset station, Auto station preset, Radio basics
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Radio Basics
continued
MONO/LOCAL Selection
• Much Interference is reduced during a weak FM stereo broadcasts
when MONO is ON. (Only for FM mode)
• Searching stops automatically at a strong signal station only when
LOCAL is ON.
Press MONO to switch between stereo and MONO mode as follows.
STEREO ON
MONO ON
Press LOCAL to switch on or off the LOG mode as follows.
LOCAL OFF
LOCAL ON
Preset Station Setting
Up to 24 stations can be preset in the station memory as follows;
FM1
FM2
FM3
AM
6 stations
6 stations
6 stations
6 stations
Manual Station Preset
© Press BAND to select a desired band.
@ Use manual or seek tuning to find a station that you want to program
into memory.
© Press and hold one of the station selector buttons 1 through 6 for
more than 2 seconds until the display blinks.
Repeat the process to set other stations for the FM1 to AM bands.
-Preset Channel Indicator
Note: You can change the memory setting by repeating the above pro
cedure.
Tuning in a Preset Station
Press any of the buttons 1 through 6 to tune in the station preset by the
above steps © to ©.
Auto Station Preset
Select a band, press and hold BAND (АРМ) for more than 2 seconds.
• The 6 strongest available stations will be automatically set in memory
on preset buttons 1 through 6.
• Once set, the preset stations are sequentially scanned for 5 seconds
each.
• Press the appropriate preset button for the station you want to hear.
CAUTION: For safety reasons, do not attempt to program while driving.
12
CQ-DPX95EUC