Petsafe Simply Clean™ Continuous Self-Cleaning Litter Box System - Manuel (Page 5)

www.petsafe.net 5
Three Easy Steps for Waste Removal
We recommend changing the recycled plastic shopping bag at least every other day (more if you have two cats), and we
recommend wearing rubber gloves while doing so.
Step 1 – Pull out Waste Receptacle.
Step 2 – Tie handles of the recycled plastic shopping bag and discard waste material.
Step 3 – Replace with a clean, recycled plastic shopping bag and return Waste Receptacle to the Simply Clean
® Litter Box System.
Step 1 Step 3 Step 2
______________________________________________________
Care and Cleaning
To Clean:
Step 1 – Unplug the Power Adapter from the unit.
Step 2 – Remove the Conveyor Cover.
Step 3 – Remove the screws from the center of the Litter Bowl and top of the Conveyor System and lift the Conveyor System.
Step 4 – Remove the Litter Bowl and dispose of used litter.
Step 5 – If further cleaning is necessary, the Litter Bowl can be fully submerged in water and washed with a mild soap. Do
not submerge or expose the electrical components to water or cleaning solutions.
Step 6 – Rinse and dry thoroughly before reassembling unit.
To Reassemble:
Step 1 – Place the Litter Bowl back into the base unit and gently lower the Conveyor System and attach the two screws.
Step 2 – Align the Conveyor Cover with the Conveyor System and snap into place.
Step 3 – Line the Waste Receptacle with a recycled plastic shopping bag and return to the unit.
Step 4 – Fill the Simply Clean
® Litter Box with premium clumping, scoopable cat litter to the designated Fill Line. Plug
Power Adapter into the unit and the system is ready for use.
Important: For the Simply Clean ® Litter Box System to operate properly, the green indicator light on the side
of the unit should be on. If the indicator light is not on, check the Conveyor Cover and the Waste Receptacle to
make sure that they are aligned correctly with the unit.