Vintage Cellars 6SDZE - Manuel (Page 22)

FEATURES FOR WINE CELLARS
Figure 17
3SWCE 4 bottles of wine per rack
Insert Wine Bottles
The roll-out shelves each hold from 3 to 10 bottles per rack
depending on model. See Figure 16 to 19 for typical wine bottle
spacing. Care should be taken when storing extra tall bottles in
the wine cradle at the bottom of the compartment because they
may prevent the door from closing.
Loading Tips and Suggestions
Keep wines that you plan to use for everyday drinking and enter-
taining on the front half of the racks where labels are completely
visible. Place wines for aging or longer term storing in the rear.
Roll-out Racks
The roll-out wine racks may be pulled out approximately 14
inches to facilitate adding or removing bottles. The bottom rack
of model 6SDZE may be pulled out approximately 8 inches. Do
NOT lean on or press down heavily on the wine shelves. Doing
so may damage the shelves and the wine bottles stored on them.
Pull the wine racks out gently and carefully to minimize unset-
tling your wine collection. Avoid pulling out more than one rack
at any time to maintain stability.
The single level roll-out racks allow you to easily view and access
your inventory without disturbing other bottles.
Figure 18
6SWCE, 6OSWCE, 6SDZE
8 bottles of wine per rack
Figure 16
3SWCCE 3 bottles of champagne per rack
Figure 19
8SWCE 10 bottles of wine per rack
22