Thetford 2118 Series Installation Manual - Manuel (Page 8)

Installation Manual 8
If the enclosure depth is 25 inches or more and less than 26 inches
(See Art02482):
- Install a top baffl e [13].
- Make sure that the top baffl e is less than 1/4 inch [15] from the top of the
refrigerator.
- Install a condenser baffl e [16] at the lowest edge of the condenser of the
refrigerator.
- Make sure that the condenser baffl e is 1 inch or less [19] from the
condenser.
- Install an absorber baffl e [171] 18 inches to 18 1/2 inches above the bottom
of the enclosure [17] (4 1/4 inches to 4 3/4 inches above the top of the lower
intake vent opening) [18] .
- Make sure that the absorber baffl e is 1 inch or less [19] from the
absorber.
If the enclosure depth is 26 inches or more (See Art02483):
- Install a top baffl e [13].
- Make sure that the top baffl e is less than 1/4 inch [15] from the top of the
refrigerator.
- Install a wood or an aluminum or galvanized sheet solid box baffl e [21] in the
rear of the enclosure.
- Make sure that the bottom of the solid box baffl e is 21 inches to 21 1/2
inches above the bottom of the enclosure [17] (71/4 inches to 7 3/4
inches above the top of the lower intake vent opening) [18] .
- Make sure that the back of the solid box baffl e is perpendicular to the
bottom of the enclosure.
- Make sure that the back of the solid box baffl e is against the top of the enclosure.
- Make sure that the solid box baffl e is one inch or less [19] from the coils [10] and
condenser [11] of the refrigerator.
- Make sure that the solid box baffl e is the full width of the inside of the enclosure.
ART 02482
15 13
16
11
10
19
19
171
17
18
ART 02483
13
12
15
19
17 18
10
21
11
9