Notice – Thetford 2118 Series Owners Manual Manuel d'utilisation
Page 5

Owner’s Manual 5
The crispers, crisper covers, beverage bin, and beverage bin cover are
removable for cleaning.
Do not wash the crispers, crisper covers, beverage bin, or
beverage bin cover in a dishwasher. These parts are not
dishwasher safe.
To remove the crisper covers (See Art02498):
- With the crisper closed, lift the crisper cover[135] to the fully raised
position.
- Locate the hinge pins[71] that are part of the crisper cover rails [197].
- Push the front of one of the crisper cover rails inward toward the
crisper so you can lift that side of the crisper cover off of the hinge pin.
- Slide the opposite side of the crisper cover off of the other hinge pin.
- To reinstall the crisper covers, do this procedure in the opposite order.
To remove the crispers (See Art02499):
- Pull each crisper forward until it reaches the “stop” position.
- Lift up on the front of the crisper [a] and continue to pull the crisper out
[b].
- To reinstall the crispers, do this procedure in the opposite order.
To remove the bottom full shelf
(See Art02500):
- Remove the crisper covers, the crispers, the beverage bin and the
beverage bin cover.
- Locate the two (2) screws [41] that attach the bottom full shelf [200]
(one screw is on the bottom of each side).
- Remove and save the screws and the plastic spacers [201].
- Using both hands, slide the shelf out of the rails.
- To reinstall the bottom full shelf, do this procedure in the
opposite order.
To remove the top full shelf (See Art02495):
- Locate the screws that attach the plastic clips [202] (the
top shelf clips are located at the end of each shelf and the
lower shelf clips are located in the center of the shelf.
- Remove and save the screws and the plastic clips.
- Pul the top full shelf forward [203] to remove.
- To reinstall the top full shelf, do this procedure in the
opposite order.
NOTICE
ART 02495
203
202
ART 02499
a
b
Art02500
201
41
200