Necessary setup before using the player, Selecting the language for on-screen display, Getting started – Sony DVP-S7700 Manuel d'utilisation
Page 9
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Getting Started
Necessary Setup Before Using
the Player
Some setups are necessary for the player depend»g on
the TV or other components to be connected.
For details on using the setup display, see page 34.
For details on each setup display item, see pages 35 to
38.
To enjoy DTS or Dolby Digital (AC-3) surround sound,
see page 32.
■To connect the player to a wide-screen TV
In the setup display, set "TV TYPE" in "INITIAL SETUP
1" to "16:9." For details, see page 36.
■ To connect the player to a normal TV
In the setup display, set "TV TYPE" in "INITIAL SETUP
1" to "4:3 LETTER BOX" (default setting) or "4:3 PAN
SCAN." For details, see page 36.
■To listen to the sound through speakers connected to a
receiver (amplifier) with a digital connector or to
output the sound to a digital component such as a DAT
or MD deck
When you play a DVD, set "DIGITAL OUT" to "ON"
and then, set "DOLBY DIGITAL" to "D-PCM" and
"DTS" to "OFF" in "INITIAL SETUP 3" in the setup
display. These are default settings. For details, see page
38.
■To connect the player to a digital component with a
built-in Dolby Digital decoder
Set "DIGITAL OUT" to "ON" (default setting) and set
"DOLBY DIGITAL" to "DOLBY DIGITAL", in'"INITIAL
SETUP 3" in the setup display. For details, see page 32.
■To connect the player to a digital component with a
built-in DTS decoder
Set "DIGITAL OUT" to "ON" (default setting) and set
"DTS" to "ON", in "INITIAL SETUP 3" in the setup
display. For details,
see
page 32.
Use the setup display to change the various settings for
the picture and sound.
For details, see page 34.
Selecting the Language for
On-screen Display
You can select the language for the setup display or the
messages displayed on the screen. Default setting is
"ENGLISH."
SET UP
ENTER
-«“/f/l-/-
1
Press SET UP and select
then press ENTER.
’ using
and
LANGUAGE SETUP
OSD:
ENGLISH
2
Select "OSD" using
♦/4/
then press ^ or ENTER.
3
Select the language you want using ♦
/■f
, then
press ENTER.
CHOIX LANGUE D’AFFICHAGE
ECRANS:
MENU DVD:
AUDIO
FRANÇAIS
ANGLAIS
ORIGINAL
SOU15.-TITRE:
SIÔNAL AUDIO SUITE
To cancel using the setup display on the way
Press SET UP.
Note
The languages you can select are the ones displayed in step 2.
For details, see page 35.
lUS