Sony CPD-1302AW2E - Manuel (Page 7)

I
RGB input selectors
Depending on the RGB output of the equipment you have connect­
ed, set these switches to one of the following four positions.
ANALOG: For microcomputers
having analog RGB output, such
as those using the PGA card.
The position of the left switch
has no effect when the right
~ switch is set to ANALOG.
NORM D1 D2
□
DIGITAL
E2
ANALOG
NORM-DIGITAL: For microcom­
puters having TTL RGB output,
such as the IBM 3270.
NORM D1 D2
E3
DIGITAL
E2
ANALOG
DI-DIGITAL: For microcom­
puters having TTL RGB and I
signal output, such as the IBM
PC, AT and XT using the stand­
ard color graphics card.
NORM D1 D2 DIGITAL
ANALOG
D2-DIGITAL: For TTL graphics
cards on the IBM PC, AT and
XT. (automatic adjustment be­
tween EGA, CGA and MDA)
NORM D1 D2 DIGITAL
ANALOG
(2 RGB IN (input) connector (9-pin 0-sub)
Allows a microcomputer having either analog or digital RGB output
to be connected.
Refer to page 8.
[to] AC IN connector
Connect to the AC outlet with the supplied AC power cord.