Sony DPP-MS300 - Manuel (Page 42)

For Your Information
Precautions
On safety
• Operate the printer on 110 to 120 V AC (for the DPP-
MS300) or 220 to 240 V AC (for the DPP-MS300E),
50/60 Hz only.
• Be careful not to set or drop any heavy objects on the
power cord, or to damage the power cord in any
way. Never operate this printer with a damaged
power cord.
• Should any solid object or liquid fall into the cabinet,
implug the printer and have it checked by qualified
persoimel before operating it any further.
• Never disassemble the printer.
• To discoimect the power cord, pull it out by the plug.
Never pull the power cord itself.
• When the printer is not going to be used for an
extended period of time, disconnect the power cord'
from the wall outlet.
• Do not handle the printer roughly.
• To reduce the risk of electrical shock, always implug
the printer from the electrical outlet before cleaning
emd servicing the printer.
On installation
• Avoid placing the printer in a location subject to:
- vibration
- high humidity
- excessive dust
- direct sunlight
- extremely Wgh or low temperatures
• Do not use electrical equipment near the printer. The
printer will not work properly in electromagnetic
fields.
• The printer is designed to operate horizontally.
Never attempt to operate the printer in a tilted
position.
• Do not place heavy objects on the printer.
• Leave enough room around the printer so that the
ventilation holes are not blocked. Blocking these
holes may cause internal heat build-up.
42°® For Your Information