Preparation, Using the video light, To turn off the light – Sony HVL-ML20 Manuel d'utilisation
Page 10: Adjusting the angle
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Preparation
See illustration B
1 Charge the battery pack (not supplied).
Use the Stmy NP-F930, NP-F730, NP-720
rechargeable battery packs pro\ ideci for \ icieo
cameras.
Refer to the instructions of the \ icfeo camera
regarding the battery charging.
2 Install the charged battery pack.
Attach the charged battery pack and slide in the
direction of the arrow until it clicks.
To remove the battery
While pressing the battery release lever ©, slide
the battery in the opposite direction to when
installed.
3 Check the 0-ring.
4 Align the marks ® on the front and rear
casings, then fasten the two buckles.
Press down the rear casing towards the front
casing and fasten the buckles.
5 Attach the arm.
® Turn and remove the angle lock screw.
® Insert the arm and turn the angle lock
screw to secure the arm.
The two arm positiorrs can be selected
depending on the direction in which the arm
is inserted.
6 Attach the video light to the marine pack
(not supplied).
® Loosen the arm lock screw.
@ Insert the arm bracket into the accessory
shoe of^he marine pack ©.
® Tighten the arm lock screw.
Using the video light
See illustration B
While pressing the upper knob, turn the power
switch counterclockwise from the LOCK position
until the white dot meets the ♦ mark.
To turn off the light
Turn the power switch clockwise to the LOCK
position.
Adjusting the angle
See illustration B
1 Loosen the angle lock screw.
2 Adjust the angle of the video light so that
the object is illuminated.
3 Tighten the angle lock screw to fix the
angle.