SPYPOINT LIT-C-1 - Manuel (Page 2)

P INT SPY
TM
INT P SPY
www.spypoint.com
LIT-C-1
rechargeable lithium battery
and charger
User’s manual
Before using the lithium battery for the first time,
carefully read the following instructions to use it to
its full potential.
FeatureS
• Charging time ≈ 6 hours
• Operating temperature (-20 °C to +50 °C)
(-4 °F to +122 °F)
• Storage temperature (-30 °C to +75 °C)
(-22 °F to + 167 °F)
Kit includeS
• Rechargeable lithium battery
• AC charger
• User’s manual
recharging the lithium battery
To recharge the battery, plug it in the provided AC charger. Green light indicates that
the battery is fully charged. The light will turn to red during the charge. The charger
will automatically stop recharging when the green light is on.
connecting lithium battery to a camera recharging with Solar panel
To recharge the lithium battery with the solar panel, insert the battery into battery
case. Plug the solar panel in the “DC 12V” or “Solar Panel” outlet of the camera
(see user’s manual of the camera to have more information).
Make sure that the battery is fully charged before plugging in the solar panel. It will
keep the charge of the battery but does not recharge it if it is empty.
RED
BLA
CK
Solar panel
SPYPOINT camera
limited warranty
SPYPOINT LIT-C-1, designed by GG Telecom, is covered by a one (1) year
warranty on material and workmanship starting on the date of original purchase.
The sales receipt is your proof of purchase and should be presented if warranty
service is needed.
This warranty does not cover any GG Telecom product which has been subjected
to misuse, neglect, accident or has been improperly used or maintained. Any
modification or tampering of the product will affect its operation, performance,
durability and void this warranty.
REPAIR SERVICE
Repairs for damages not covered by the warranty will be subject to a reasonable
charge. For technical assistance, write to [email protected]. Give a description of
the problem with a phone number where you can be reached.
IMPORTANT: Under no circumstances will GGTelecom accept returned goods
without a Return Material Authorization number (RMA).
Step 1
Connect the cable from the battery case to the lithium
battery.
Step 2
Insert the battery into the battery case starting with the
right side, this will allow you to push on both springs.
Step 3
Push with your finger on the left spring and insert the
battery.