SPYPOINT G4-2011 - Manuel (Page 26)

26
DISTANCE
The « DISTANCE » dial (placed on the side of the camera) can
adjust the sensitivity of the detector . The camera is equipped
with a detector sensitive to infrared. The system detects only heat
source in motion. The greater the mass of heat, more sensitive is the
system. Range of detector is between 5 and 50 feet. Turn dial up
to increase distance. The best way to adjust the distance is to set the
camera in mode « SET/ TEST » (see above). Make sure to have the
least possible objects in front of the camera during the positioning.
This prevents picture taken by the camera when oriented towards
the sun while an object moves in front of the camera (eg. a branch)
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera « OFF » and connect the USB cable (supplied)
from the camera and to your computer. The computer will
recognize the camera and install the software itself. Click on
« My Computer » and select « Removable Disk ». Then click
« DCIM » and « 100DSCIM » to find all your photos
and videos.
Taking the SD card out of the camera and inserting it into the
computer port will achieve same results. If no SD slot is built
into the computer, a multi-card reader RD25-1 (sold separately)
must be used.
TELEVISION
To see photos and videos directly on a TV screen, turn
« OFF » your camera and select « VIEW ». Connect the yellow
end of the cable (supplied) into the « VIDEO IN » of the TV and
the other end into the « TV OUT » of the camera . Turn « ON »
the camera. You will see the last picture or video recorded by
your system. To change the picture or the video, use the key
« UP » or « DOWN ». If you press « MENU/OK », the
following options will appear:
English