Humanscale Diffrient Task Light II - Manuel (Page 3)

Panel Mount
Consult manufacturer’s instruction for panel mount
installation.
Access Rail
Turn fastening dial clockwise until the mount slides
into the underside of the Access Rail.
Turn fastening dial counterclockwise until the mount
is secure.
Wall Mount
Pre-drill a hole for the wall mount guide (d) using a
3/16” bit.
Hollow Wall (1/2” minimum thickness)
With the guide positioned in the hole and the mount
perfectly plumb, mark the anchor location. Drive the
anchor into the marked location with a screwdriver
until it stops. Attach the mount to the anchor with
the provided 2” long screw.
Solid Surfaces/Stud
With the guide positioned in the hole and the mount
perfectly plumb, mark screw location. Drill 1/8” hole,
then attach the mount to the wall with the 1” screw
provided.
ENGLISH
Slatwall Mount
Loosen the two knobs on the face of the mount
until the L-bracket fits into the slatwall, fully
engaging the slatwall lip.
Tighten both knobs to secure the mount.
d