Gamber-Johnson 7160-0280 - Manuel

INSTALLATION INSTRUCTIONS
Product Revision Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Rev.B INST-500
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© copyright 2010 Gamber-Johnson, LLC
Printing Spec: PS-001
POLE - SPRING LIFT
7160-0280
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
The Spring Lift provides a fully adjustable system to mount Gamber Johnson equipment to. The Spring
Lift will support a mounted docking station with computer and balance the system when the lift height is
adjusted. In addition, the Spring Lift automatically clamps the inner slide in place upon release of the
handle allowing for set and forget positioning.
Tools Needed
•
7/16 Wrench
Operation
Vertical Adjustment
1. Rotate the handle more than 90 degrees counter clockwise, in the direction of the arrow.
2. To raise the lift, hold the handle and lift the platform by pulling up on the front of the dock.
3. To compress the lift, hold the handle and push back and down on the top of the dock.
4. Release the handle to secure the lift in place.
Recommended Solution
The Spring Lift can be used with many Gamber Johnson motion attachments. The system is well suited
for use with any Clevis or any Quad-Motion device.
Handle
Wire Service Loop
Mounting Locations
Caution: Spring Lift moves
quickly without top attachment.