Snorkel SPM20 CE-sn0001+ - Manuel (Page 17)

14
1.Do not exceed platform rated capacity or rated number of people.
Evenly distribute load.
2.Do not expose platform to high winds or horizontal forces.
3.Machine must be on smooth,firm and level surface before elevating
platform.
4.Do not drive with platform raised,or raise platform when on
uneven,sloping or soft surfaces including trucks,trailers,railway
cars,floating vessels,scaffolds or similar areas.
5.Do not drive near drop offs,holes or other hazards.
6.Make sure operating surface will support the machine.
7.Make sure all tires are in good condition.
8.If required,outriggers or stabilizer shall be extended and properly
set.
9.Do not carry sheet type materials (i.e. drywall,plywood,roof panels)
outdoors or in any windy conditions as they may act as a wind sail.
FALLING HAZARD
1.Keep both feet on platform floor.
2.Do not climb,sit or stand on platform guard rails.
3.Ensure entrance area is properly closed.
4.Do not use planks,ladders or similar items in platform to get
added reach.
5.All guard rails must be properly installed during operation.
CRUSHING HAZARD
1.Alwaws look in the direction of movement.
2.Keep clear of obstructions.
3.Keep all body parts inside platform during operation.
CHARGING USAGE
This is only one position to charge. If you
charge at any other error situation, this will be
result in dangerous and hazardous aftermath.
NOTICE