Philips 10000100 - Manuel (Page 30)

28
3
4 5 6
8 9 7
2
PROGRAMMING THE MACHINE
MILK CIRCUIT WASH CYCLE
To rinse the machine’s internal circuits used for preparing milk.
After 14 days from the fi rst dispensing of a beverage with milk, the “milk cleaning” button stars fl ashing
(see page 13). Press the button and refer to instructions at point 2. This cycle must be performed after 21 days.
Refer to the instructions at point 3.
Before performing this function make sure that:
1. a large enough container is at hand.
2. the milk container has been adequately cleaned of all milk residue.
3. the water tank contains a suffi cient quantity of water.
THE WASH CYCLE CANNOT BE INTERRUPTED. A PERSON MUST BE PRESENT DURING THE OPERATION.
USE ONLY AND EXCLUSIVELY THE PROVIDED DETERGENT.
dispense hot water into
the milk tank
milk cleaning cycle
start hot
water
dispensing hot water...
milk cleaning cycle
add detergent to the milk tank
and insert it into the machine
milk cleaning cycle
add detergent to the milk tank
and insert it into the machine
milk cleaning cycle
ok
please wait until the detergent
is resolved
milk cleaning cycle
Select the function by
pressing the “milk cleaning
cycle” button. Position the milk container
under the water spout. Press the “start hot water”
button to dispense hot water
in the container.
Wait… When the container is fi lled the
above message will appear. Insert the detergent tablet
into the container.
Open the compartment and
insert the container with the
detergent into the machine. Close the compartment. Press
the “ok” button. Wait…
Place a container beneath the
hot water spout.
go back
coffee
cleaning
cycle
maintenance
descaling
cycle
lock
display
milk
cleaning
cycle
milk
rinsing
cycle
go back
back to
menu
1