Breville The Juice Fountain Duo BJE820XL - Manuel (Page 17)

17
PAGE HEAdER..... OPERATING yOUR BREvILLE JUICE fOUNTAIN™ dUO
NOTE
OVERLOAD PROTECTION BUTTON
The Breville Juice Fountain™ Duo
is fitted with a safety device which
safeguards against overloading
with excessive loads. If this occurs,
juicer will automatically activate the
overload protection button and the
unit will turn itself off. If this occurs,
remove the plug from the outlet and
allow the unit to cool. Then press the
Overload Protection Button found
on the bottom of the Motor Base. The
safety device will then be reset and
the Breville Juice Fountain™ Duo is
ready for use again.
USING THE PUREE dISC
When using the Puree Disc, puree will flow
into the juice jug. There will be no pulp
extracted into Pulp Container.
NOTE
SELF-RESET OVERHEATING
PROTECTION The Breville Juice
Fountain™ Duo also fitted with a
self-resetting safety device which
safeguards against overheating on
the motor with excessive loads. If
overheating occurs, the juicer will
automatically activate the overheating
protection device and the motor will
turn itself off. If this occurs, the light
surrounding the Start|Stop button
will flash red. When the overheating
protection is activated, unplug the
juicer from power outlet for at least 15
minutes to allow the unit to cool. Then
plug juicer into the power outlet and
use as normal.
NOTE
ELECTRONIC PROTECTION The
Breville Juice Fountain™ Duo will
automatically stop operating if the
motor is stalled. This is an electronic
safety feature. Either too much food
is being processed at one time or
the pieces are not small enough. Try
trimming food, cutting food into
smaller pieces of even size
and/or processing a smaller amount
per batch. If this occurs, the light
surrounding the Start|Stop button will
flash red. To continue juicing, turn
the power OFF at the control panel,
clear the feed chute, finally turn the
appliance back on by pressing the
Start|Stop button to ON.