Black & Decker CM9050C Manuel d'utilisation
Page 5

8
7
Note: You must set display clock in order to use Delayed Brewing feature.
3. To change time, press HOUR (HR) button until correct
time appears
(F).
Note: When time passes noon, a small icon appears in
bottom right corner of digital display to let you know you
are in P.M. time. If P.M. indicator is not illuminated, time
is A.M.
4. Repeat with MInUTe (MIn) button
(G). (If minute setting
is not changed within 5 seconds, clock will revert to
default time and selection of hour and minute must be
repeated.)
Tip: Hold buttons down to make hours and minutes change
rapidly after a short delay. To change the time in 1-digit
increments, press and release buttons.
Note: If coffeemaker is unplugged or power is interrupted even momentarily,
display time may need to be reset.
BREWING COFFEE
Note: It is not necessary to set the clock to brew coffee unless you want to use
Delayed Brewing feature.
1. Open water reservoir lid.
2. Fill water reservoir with desired amount of cold tap
water using water markings on front of reservoir. Do not
exceed 12-cup maximum level
(H). Close lid on water
reservoir.
3. If desired, place an 8 to 12 cup basket style paper filter
into the removable brew basket, making sure filter is
centered in brew basket. Otherwise, simply use and
center your permanent gold tone filter.
4. Add desired amount of ground coffee.
5. Insert brew basket into brew basket holder following directions in GeTTInG
STARTeD.
6. Close brew basket lid.
7. Place brew-thru lid on empty carafe.
Note: Coffee may overflow if brew-thru lid is not properly aligned.
8. Place empty carafe on adjustable temperature keep warm carafe plate.
9. Plug cord into standard electrical outlet.
10. Press power I/O
(On/OFF) button; power light is
illuminated. Brewing begins OR, to delay brewing, set
auto function before pressing the power On/OFF button
(see DeLAYeD BReWInG)
(J).
11. When coffee stops flowing into carafe, brew cycle is
complete.
12:00
F
MAX
H
12:15
G
12. Once coffee grounds have cooled, carefully open brew basket lid and using
basket handle, remove and discard used grounds and paper filter (if used).
Close brew basket lid.
13. Coffeemaker will keep brewed coffee hot for 2 hours and then automatically
turn off.
14. To turn off coffeemaker at any time, press I/O (On/OFF) button.
15. Unplug appliance when not in use.
SNEAK-A-CUP
®
INTERUPT FEATURE
The Sneak-A-Cup
®
interrupt feature allows you to pour a cup of coffee from
the carafe while coffee is brewing. When carafe is removed, brewing process is
paused. Simply replace carafe on the carafe plate within 30 seconds and brewing
resumes.
Note: If the carafe is not replaced within 30 seconds the brew basket may
overflow.
ADJUSTABLE KEEP WARM CARAFE PLATE
1. Once coffee has brewed, press KeeP WARM button to select desired holding
temperature of adjustable keep warm carafe plate.
2. Temperature range is from 1 (lowest temp) to 7 (highest temp).
3. When button is pressed, number “4” (medium temp) will appear in digital
display.
4. Press HOUR (HR) button to increase setting and MInUTe (MIn) button to
decrease set temperature.
BREWING 1 – 4 CUPS
When brewing small amounts of coffee, press the 1 – 4
CUPS button. CUP icon will appear on left side of digital
display
(K).
TIME SINCE BREWED FEATURE
To check freshness of brewed coffee, press and hold TIMe
SInCe BReWeD button. The visual display will indicate
how long ago last brewing was completed. When button is
released, normal time display will appear. This feature will
function until coffeemaker is manually turned off or after
2 hours when coffeemaker automatically turns off
(L).
DELAYED BREWING
1. Follow steps 1 through 9 under BReWInG COFFee.
2. Make sure clock has been set to correct time of day.
3. Press PROGRAM (PROG) button; clock icon appears on left side of digital
display.
4. Digital clock displays 12:00 or previous preset delayed brewing start time.
L
6:00
K
J