Tips and troubleshooting learning more – BIONAIRE PERMAtech BAP1700-CN Manuel d'utilisation

Page 6

Advertising
background image

E11

TIPS AND TROUBLESHOOTING

LEARNING MORE

For a wealth of information about your air cleaner and
other Bionaire

®

products, visit our website at

www.bionaire.com.

E10

The filter may appear discolored, even after
vacuuming. This is normal and does not affect
performance in any way—a new filter is not
necessary.

If the filter becomes damaged during cleaning, call
1-800-253-2764 to order replacements.

REINSTALLING THE PERMAtech

TM

FILTER AFTER

CLEANING

NOTE: A hang tab and filter clips
ensure the filter attaches properly.

1. Make sure the hang tab is

securely in place. Align the clip
on the top of the PERMAtech

TM

filter with the rails on the inside of
the unit. Gently slide the filter onto
the rail (see Figures 3 and 4).

2. Place air inlet grill back onto unit

securely.

3. After replacing the filters, RESET

the Clean Filter Indicator (

) by

inserting a small object (such as a
pin or paper clip) into the hole
below the filter change light (see
Figure 5). The light will turn off.

Figure 3

Figure 4

ISSUE
UNIT WILL NOT
OPERATE

DECREASED AIR
FLOW

PERMAtech

TM

FILTER APPEARS
DIRTY, EVEN AFTER
VACUUMING
CLEAN

EXCESSIVE NOISE

SOLUTION

• Make sure unit is properly plugged in

and outlet is energized.

• Make sure unit turned ON.
• Make sure nothing is blocking air inlet

and filtered air outlets.

• Remove all plastic bags from filters.
• Check condition of filters and clean if

necessary.

• Make sure that the air intake grill is at

least 1 to 3 feet from away the wall.

• When unit operates in the AUTO

mode, it will automatically adjust the
fan speed to provide optimum filtra-
tion based on air particulate concen-
tration. Therefore, depending on the
air quality in the room, some variation
in air flow is normal and expected.

• This is normal and does not affect

performance in any way. A new filter
is not necessary.

Remove plastic bag(s) from filter(s).

Make sure parts are firmly positioned

in place.

Figure 5

Reset
Button

BAP1700-CN_08EFM1.qxd:BAP1700-CN_08EFM1.qxd 6/25/08 9:33 AM Page 11

Advertising