Breville the Juice Fountain Compact BJE200XL - Manuel (Page 19)

19
TROUBLEShOOTING
POSSIBLE PROBLEM EASy SOLUTION
Machine will not work
when turned ON The safety locking arm may not be correctly engaged in the
vertical operating position with the locking arm located into
the two grooves on either side of the juicer cover.
Motor appears to stall
when juicing Wet pulp can build up under the cover if the juicing action is
too vigorous. Try slower juicing action by pushing the food
pusher down slower. Clean the integrated pulp container, the
Nutri Disc™ and the juicer cover.
Excess pulp building
up in the Nutri Disc™ Stop the juicing process. Remove the juicer cover, scrape off
pulp. Re-assemble and begin juicing again. Try alternating
(soft and hard) vegetable and fruit varieties.
Pulp too wet and
reduced extracted
juice Try a slower juicing action by pushing the food pusher down
slower. Remove Nutri Disc™ and thoroughly clean mesh walls
with the nylon brush. Rinse the Nutri Disc™ under hot water.
If the fine mesh holes are blocked, soak the Nutri Disc™ in
a solution of hot water with 10% lemon juice to unblock the
holes or wash in the dishwasher. This will remove excess fiber
build up (from fruit or vegetables) which could be inhibiting
the juice flow.
Juice leaks between
the rim of the juicer
and the cover of
the filter
Try a slower juicing action by pushing the food pusher down
slower.
Bowl container juice
sprays out from spout Try a slower juicing action by pushing the food pusher down
slower.
Juicer makes loud
noise when turned on Nutri Disc™ is not properly locked into position. Turn the ON/
OFF button to OFF and unplug.
Disassemble the juicer (refer to disassembling).
Re-assemble (refer to assembly).
No juice coming out
while juicing Check that the spout is not blocked with pulp.
Refer to care and cleaning.