Pioneer DV-636D - Manuel (Page 20)

20
En
System Control Connections
Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player’s
CONTROL IN jack to the CONTROL OUT jack of
another PIONEER component bearing the
Î mark, you
can control the player as though it were a component in
a system (system control).
• If you connect for system control, you cannot operate
the player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
CONTROL OUT jack to operate.
• When controlling as a system, be sure to make a
connection to the amplifier using an audio or video
cord, even when using only digital components.
• For details, refer to the operation manuals of the
connected components.
AV CONNECTOR Connections
Using a commercially available 21-pin SCART cable,
connect the AV CONNECTOR jacks on the player to a
TV or monitor to achieve audio and video with a single
connection.
AV1 (RGB)-TV jack
• The video output signal of the AV1 (RGB)-TV jack
contains composite video, S-video, and RGB
information. After making physical connections to your
TV or monitor, select the most appropriate video
format in the [Video Out] setting in the Setup screen
Video menu (page 30).
• SCART cables are available in a variety of
configurations. Before making connections, be sure to
check that the cable you are planning to use is
appropriate for the TV or monitor you are making
connections to.
• AV CONNECTOR pin signal descriptions can be found
in the ‘Specifications’ (page 64).
AV2 jack
• The video output signal of the AV2 jack contains
composite video information. After making physical
connections to your TV or monitor, select the most
appropriate video format in the [Video Out] setting in
the Setup screen Video menu (page 30).
• SCART cables are available in a variety of
configurations. Before making connections, be sure to
check that the cable you are planning to use is
appropriate for the TV or monitor you are making
connections to.
• AV CONNECTOR pin signal descriptions can be found
in the ‘Specifications’ (page 64).
CONTROL OPT.
AUDIO OUT (2CH) AUDIO OUT (5.1CH) AC IN VIDEO OUT
NTSC PAL AUTO OUT IN
R
2 1
R
L L 1
2
1
2
FRONT SUB WOOFER
CENTER
TV SYSTEM
AV CONNECTOR
DIGITAL OUT
SURROUND
S-VIDEO OUT
AV2 AV1 (RGB) -TV
AV CONNECTOR AV2 AV1 (RGB) -TV
VCR, etc.
Pioneer component with Î mark.
CONTROL OPT.
AUDIO OUT (2CH) AUDIO OUT (5.1CH) AC IN VIDEO OUT
NTSC PAL AUTO OUT IN
R
2 1
R
L L 1
2
1
2
FRONT SUB WOOFER
CENTER
TV SYSTEM
AV CONNECTOR
DIGITAL OUT
SURROUND
S-VIDEO OUT
AV2 AV1 (RGB) -TV
CONTROL
OUT IN
CONTROL
OUT
CONTROL OPT.
AUDIO OUT (2CH) AUDIO OUT (5.1CH)
AC IN VIDEO OUT
NTSC PAL AUTO OUT IN
R
2 1
R
L L 1
2
1
2
FRONT SUB WOOFER
CENTER
TV SYSTEM
AV CONNECTOR
DIGITAL OUT
SURROUND
S-VIDEO OUT
AV2 AV1 (RGB) -TV
AV CONNECTOR AV2 AV1 (RGB) -TV
TV or
monitor
Note
When the power is off the signal arriving at the AV2 jack is
passed through to the AV1 (RGB)-TV jack.