Select one, Connecting up 02 – Pioneer HTP-710 Manuel d'utilisation
Page 38

Connecting up
02
38
En
Connecting an HDD/DVD recorder, VCR and other video sources
This system has audio/video inputs and outputs suitable for connecting analog or digital video
recorders, including VCRs and HDD/DVD recorders.
1
Connect the composite video output on
your video component to the VIDEO DVR/VCR
input on this system.
Use a standard RCA video cable.
• If the video component connected is
equipped with an HDMI output, an HDMI
cable may also be used for connection. In
this case, use an HDMI cable to connect
the TV as well.
2
Connect the VIDEO DVR/VCR OUT on this
system to the composite video input on your
video component.
3
Connect the audio output on your video
component to the AUDIO DVR/VCR IN inputs
on this system.
Use a stereo RCA phono cable. If your
component has a digital output, you can also
use an optical cable or coaxial cable for the
connection.
1
4
Connect a video inputs on the recorder to
the VIDEO DVR/VCR output on this system.
Use a standard RCA video cable.
1
1
2
HDMI OUT
ANALOG
R
L
AUDIO IN
ANALOG
R
L
AUDIO OUT
DIGITAL OUT
COAXIAL
OPTICAL
VIDEO OUT
VIDEO IN
1
2
4
3
Select one
Select one
DVR, VCR, LD player, etc.
Note
1 In this case, you’ll need to tell the system which digital input you connected the component to (see Choosing the input
signal on page 54).
HTP-710_VYXCN_En.book 38 ページ 2010年8月23日 月曜日 午後6時47分