NaceCare Solutions TTB1620 - Manuel (Page 19)

19
Lowering the brush deck
Fig.18
The control for lowering the brush deck can be found to the rear of the machine (fig 18).
Lower the brush deck by moving the left hand release lever to the upper position (see fig. 19).
Fig.19
Machine Operation
Turning the Machine on
Set Water Flow Rate as required, depending on floor type and level of soiling
Insert the key into the master control on/off and quarter-turn it clockwise to the ‘ON’ position.
The battery charge-level indicator will illuminate for 5 seconds.
0.13 gpm
0.26 gpm
0.52 gpm
0.79 gpm
Setting the Cleaning Controls
Setting the Water Flow Rate