Sony PCV-MXS10 Manuel d'utilisation
Page 41
Removing, Installing, and Replacing Components
29
5
Remove the add-in card from the PCI slot and store the card in an
anti-static wrapper for future use.
6
If you do not replace the card or install another add-in card, install a
slot cover over the vacant slot at the rear of the chassis (see
7
Replace the side cover (see
✍
Grasp the card with one hand on each end, and gently pull up as you rock the card
from side to side.
!
Hold the add-in card by its edges and do not touch any components or
contacts on the card. Static electricity in your body may damage
sensitive components on the card. As a precaution, touch any exposed
metal part on the metal chassis (preferably the metal part on the power
supply) before handling an add-in card to discharge any static electricity
in your body.