Samsung PN51D550C1FXZA - Manuel (Page 10)

English - 10
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic
settings. To turn on the TV, press the
POWER P button.
✎
Plug & Play is available only when the Source is set to TV.
✎
To return to the previous step in the Plug & Play sequence, select Previous, and then press ENTER E.
✎
Before turning on the TV, make you have connected the TV to an antenna or cable connection (p. 8).
1
Selecting the OSD
Language Press the ▲ or ▼ button to select a language. Press ENTER E twice
when done.
2
Selecting the usage
mode Press the ▲ or ▼ button to select, and then press the ENTER E button
twice.
y Select the Home Use mode. Store Demo mode is for retail
environments.
3
Setting the Clock
Mode Press the ▲ or ▼ button to select Auto or Manual, and then press
ENTER E twice.
✎
If you selected Auto, you’ll go to the Time Zone and DST screen. Select Time Zone
or DST, and then press
ENTER E. On the Time Zone screen, use the ▲ or ▼
button to select your zone, and then press ENTER E. On the DST screen, press,
ENTER E, then select whether to turn DST (Daylight Savings Time) on or off. When
done, press ENTER E.
✎
If you selected Manual, you’ll go to the Date and Time screen. Select Date or Time,
and then press
ENTER E. Then, use the number buttons or the ▲ or ▼ button to
set the date or time. Use the ◄ or ► button to move between entry fields. When
done setting the Date and Time, select Next, and then press ENTER E.
4
Selecting search
options for auto tuningl Press the ▲ or ▼ button to select Air or Cable, and then press ENTER E. A check
appears on your selection. Select Next, and then press the ENTER E button. You can
check both if you have both connected.
✎
If you selected Cable, you’ll go to the Cable System screen. Use the ▲ or ▼
button to select Digital or Analog, and then press. ENTER E. Use the ▲ or ▼
button to select the correct cable signal format - STD, HRC, or IRC - and then press
ENTER E. Most cable systems use STD. Select the correct cable signal format for
both the Digital and Analog systems.
✎
When done, select Search, and the press ENTER E.
5
Selecting and
memorizing channels The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to Channel
→ Auto Program in the e-Manual.
✎
Press the ENTER E button at any time to interrupt the memorization process.
6
Network Setting / Enjoy
your TV If you want to watch a broadcast program, select Enjoy your TV. You can set up the
Network connection. If you want to set up the network, select Network Settings. The
Network Settings screen will appear. For more detailed information, refer to “Network
Connection” in the e-Manual.
If You Want to Rerun Plug & Play...
O
MENU → System → Plug & Play → ENTER E
✎
NOTE
y To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume bar on the screen, press and hold the
MENU on the TV for 5 sec.
P
POWER
INFO GUIDE
[PD550-ZC]BN68-03448B-01L02.indb 10 2011-02-14 오후 4:18:57