Schumacher PIF-2000 - Manuel (Page 5)

• 2 •
Only connect the power inverter to a 12 volt battery or power supply. Do not attempt 1.10
to connect the inverter to any other power source, including an AC power source.
Connecting to a 6 volt or 16 volt battery will cause damage to the inverter.
Make sure the AC plug is tight.
1.11
Do not modify the inverter in any way including cables, plugs, switches or AC receptacles 1.12
as it may result in property damage or personal injury.
Incorrect operation of the inverter may result in property damage or personal injury.
1.13
The inverter output is 120V AC and can shock or electrocute the same as
any ordinary household AC wall outlet.
Do not open – No user serviceable parts inside.
1.14
This device does not include an internal Ground Fault Circuit Interrupter (GFCI). 1.15
To reduce the risk of electric shock, disconnect the inverter from the power source before 1.16
attempting any maintenance or cleaning. Simply turning off the controls will not reduce
this risk.
Do not operate the inverter with damaged cables; have the cables replaced immediately
1.17
by a qualified service person. (Call customer service at: 1-800-621-5485.)
Do not operate the inverter if it has received a sharp blow, been dropped or otherwise
1.18
damaged in any way; take it to a qualified service person. (Call customer service at:
1-800-621-5485.)
Do not disassemble the inverter; take it to a qualified service person when service or
1.19
repair is required. Incorrect reassembly may result in a risk of fire or electric shock. (Call
customer service at: 1-800-621-5485.)
Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive
1.20
gases during normal battery operation. For this reason, it is of utmost importance that you
follow the instructions each time you use the inverter.
This inverter employs parts, such as switches and circuit breakers, that tend to produce
1.21
arcs and sparks. If used in a garage, locate this inverter 18 inches (46 cm) or more above
the floor level.
Do not use the inverter with a product that draws a higher wattage than the inverter can
1.22
provide, as this may cause damage to the inverter and product.
INVERTER FEATURES 2.
ON/OFF Pushbutton Switch 1.
Digital Display 2.
LED Indicator Lights 3.
Green = DC Power •
Yellow = Overload Shutdown •
Red = High or Low Input Voltage Shutdown •
Three 120V AC Outlets (NEMA 5 - 15) 4.
Reset Buttons 5.
USB Power Port 6.
Remote Control Port* 7.
High Speed Cooling Fan 8.
1
2
8
3
4
5
6 7
*NOTE: There is an optional remote control available. To purchase it or for more information,
call customer service at: 1-800-621-5485.