STEINEL TR 150 - Manuel (Page 6)

www.steinel.net (800) 852-4343 www.steinel.net (800) 852-4343
10
TR 150 wiring
Wiring
BLUE (CONTROL)
BLACK (-24VDC)
RED (+24VDC)
GRAY (MOMENTARY SWITCH)
YELLOW/RED (NORMALLY OPEN)
YELLOW (RELAY COMMON)
YELLOW/BLACK (NORMALLY CLOSED)
ORANGE (OVERRIDE ON)
BROWN (OVERRIDE OFF)
Normally open momentary contact switch
Maintained contact switch
WHITE (NEUTRAL) BLACK (HOT) RED (RELA
Y)
RED (RELA
Y)
BLUE (CONTROL) BLACK (-24VDC) RED (+24VDC)
Model#
TR150
Power Pack
LINE VOLTAGE
SWITCH
24VDC
Sensor
Isolated Relay
NORMALLY OPEN
RELAY COMMON
NORMALLY CLOSED
Building Management
System
LOAD
NEUTRAL
HOT
Symbol List
11
Operation
The TR 100 and TR 150
power packs work with
STEINEL low voltage
occupancy sensors and
other control devices.
The power packs switch
loads ON or OFF in
response to signals from
the control devices.
Each power pack
contains a Mode Switch
(see page 6) to select
either manual ON or
automatic ON operation.
Automatic ON Mode
To select automatic ON,
adjust the mode switch
to the right (default
setting). Loads turn ON
and OFF automatically
using an occupancy
sensor, timer, control
panel or BAS input.
With an occupancy
sensor, when a
momentary switch is
used to turn lights OFF,
automatic ON mode
will resume only after
the sensor’s time delay
elapses (space has
been unoccupied for
the duration of the time
delay). Pressing the
momentary switch before
the time delay elapses,
turns the load ON.