Options, 1 temperature, 2 spin – Electrolux EWF1286GDW Manuel d'utilisation
Page 10: Additional spin options

Pro-
grammes
Load
(Kg)
Energy
consump-
tion (kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme
duration
(minutes)
Remain-
ing mois-
ture (%)
1)
Standard cotton programmes
Standard 60
°C cotton
8
1.04
46
208
53
Standard 60
°C cotton
4
0.65
45
156
53
Standard 40
°C cotton
4
0.49
44
156
53
Off Mode (W)
Left On Mode (W)
0.6
0.6
The information given in the chart above are in compliance with the EU Commis-
sion regulation 1015/2010 implementing directive 2009/125/EC.
1) At the end of spin phase.
7. OPTIONS
7.1 Temperature
Set this option to change the default tem-
perature.
Indicator
= cold water.
The display shows the set temperature.
7.2 Spin
With this option you can decrease the de-
fault spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin pha-
ses.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
• The display shows the indicator
.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with the
water in the drum. The drum turns reg-
ularly to prevent the laundry creases.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator
.
To drain the water refer to ‘At the
end of the programme’.
Extra Silent
• Set this option to remove all spin pha-
ses and to perform a silent washing.
• The rinse phase uses more water for
some washing programmes.
• The washing programme stops with the
water in the drum. The drum turns reg-
ularly to prevent the laundry creases.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator .
To drain the water refer to ‘At the
end of the programme’.
10 www.electrolux.com