Electrolux ERF3867SOX - Manuel (Page 19)

7.10 Installation of the water filter
1
2
Unpack the filter.
• Remove the accessories in front of the
water module and open the service
hatch.
• Place a cloth or a piece of kitchen towel
in the space beneath the water filter.
• Pull the bypass cartridge outwards,
grasping the lower part, until the water
bypass cartridge is automatically ejec-
ted.
• Remove the protective wrapping of the
new water filter and insert the new filter
firmly into the filter connection.
• Push the water filter back to its original
position.
• Remove cloth or towel and make sure
that spilled water is wiped off.
• Close the hatch and remount the interi-
or.
• Keep the bypass cartridge for future
use.
• Select Still cold water and dispense
about 2 litres of water. There may be
some air to start with.
7.11 Installation of the gas cylinder
• Remove the gas cylinder wrapping and
screw on the adapter to the gas cylin-
der. Tighten by hand only.
ENGLISH 19