Electrolux ERF3867SOX - Manuel (Page 38)

7.4 Removing the transport support
2
3
Your appliance is equipped with transport
support to secure the door during trans-
portation.
To remove them do these steps:
• Open the door.
• Remove the transport support (2) from
the door sides.
• Remove the transport support (3) from
the lower hinge (some models).
5
4
5
• Remove the transport support (4) from
underneath the water unit.
• Cut the pump securing tie (5) and re-
move it.
Some models are fitted with a si-
lencing pad under the cabinet. Do
not remove this pad.
7.5 Rear spacers
• Install the spacers provided within the
accessory bag as shown in the figure.
• Install the spacers on the brackets of
the condenser (black grill) at the back of
the appliance.
38 www.electrolux.com