Bosch NGMP655UC - Manuel (Page 11)

English 8
Placing Burner Caps
Each cap has a letter (A, D, or F) cast in the underside of
the cap that corresponds to a letter (A, D, or F) cast in the
burner base that is attached to the appliance.
• Place each burner cap on its correct burner base per
its corresponding letter designation. See figure
“Burners Caps” on page 8.
• Place burner cap gently on top of base so that the
prongs of the burner base fit snugly into the groove of
the burner cap.
Checking Burner Cap Placement
• Check to make sure there is not gap between the
burner cap and burner base. See figure “Burner Cap
Placement” on page 9 to see the correct and incorrect
placements of the burner cap.
• You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
Figure 4: Burners Caps
Burner Base
Burner Cap
Matching letter
designation.