CAMPO EQUIPMENT MOFH280400 - Manuel (Page 13)

CAMPO EQUIPMENT CO. LTD. (ECOBLAZE)
6 Carson Court, Brampton, ON, CANADA, L6T 4P8
Tel: (905) 793-2525 | Fax: (905) 793-8768 | www.campoequipment.com
2 400-800 Ohms
3 800-1600 Ohms
4 >=1600 Ohms
BURNER (OIL OPERATION)
The electrode spacing must be checked and adjusted, if necessary after every nozzle change. Nozzle should be
replaced annually or sooner if burner cannot be set up to operate properly. Nozzle size and type are marked on the
rating plate.
AFTER INSPECTION, A COMPLETE COMBUSTION TEST MUST BE PEFORMED AFTER EACH ANNUAL
SERVICE OF THE UNIT TO MAINTAIN OPTIMUM PERFORMANCE AND RELIABILITY.
WARNING: TURN OFF THE FUEL SUPPLIES AND POWER BEFORE PERFORMING SERVICE
WORK. THE 120V CIRCUIT IS A POTENTIAL ELECTROCUTION HAZARD.
THE WRAP-AROUND EXCHANGER CAN NOW BE CLEANED ENTIRELY FROM THE CLEAN-OUT PORT AND
THE FLUE PIPE CONNECTION.
HEAT EXCHANGER CLEANING PROCEDURE
1.) REMOVE EASY ACCESS PANEL LOCATED ON TOP HEATER BOX PANEL
2.) REMOVE EASY ACCESS PANEL LOCATED ON TOPSIDE OF HEAT EXCHANGER
3.) SHOVE FLEXIBLE BRUSH VIA ACCESS PANEL AND CLEAN THOROUGHLY
4.) SHOVE FLEXIBLE VACUUM VIA ACCESS PANEL AND VACUUM THOROUGHLY
HEAT EXCHANGER REASSEMBLY AFTER CLEANUP
1.) CLOSE EASY ACCESS PANEL LOCATED ON TOPSIDE OF HEAT EXCHANGER
2.) CLOSE TOP BOX EASY ACCESS PANEL
COMBUSTION AIR ADJUSTMENTS
Firing rate (GPH) 2 2 2 2
Pump Pressure (PSIG) 100 120 150 200
Input (BTU/h) with NO.1 fuel 277,000 310,240 339,325 391,955
Input (BTU/h) with NO.2 fuel 280,000 313,600 343,000 396,000
BECKETT BURNER