MAX AKHL1250E - Manuel (Page 12)

12
2. NAME OF PARTS (See Fig.A)
Description of Functions of Key Components
1 Power switch Turns on or off the power supply
2 Pressure-Reduction valve adjust-
ment handle (H) (Orange cap) Intended for exclusive use with the tool. It adjusts
the operating pressure of the tool.
3 Pressure-Reduction valve adjust-
ment handle (L) (Yellow cap) Adjusts the pressure supplied to the general-purpose
nailers and pneumatic tools (operating air pressure
120 psi (8.3 bar) maximum).
4 Pressure gauge in the tank Indicates pressure in the tank. The pressure increases
up to 500 psi (34 bar).
5 Pressure gauge for indicating the
set reduction valve pressure (2
gauges) It indicates the set pressure on the pressure-reduction
valves (H) and (L).
(355 psi (24.5 bar) maximum on the H side and 120 psi
(8.3 bar) maximum on the L side.)
6 High pressure air chuck (for MAX
tools)
It connects the MAX air hose for the tools.
7 General-purpose air chuck (for reg-
ular pressure tools) It connects the air hose for the general-pressure nailers.
Fix the General-purpose air chuck in this nipple:
NPT 1/4" (for regular pressure tools). Ask your dealer or
an authorized service facility to fix it.
8 Drain cock It drains compressed air and water, Drain once when the
work is finished or more a day.
9 Power plug It is usable with a triode ground outlet.
0 Control panel It allows switching the mode between Normal, High Pow-
er and Quiet. (See Fig.B) For details of the LEDs and
switches on the Control panel, see "Control Panel" on
page 13.
• Current consumption is reduced in the operation in
Quiet mode.
a Air tank
b Rubber foot
c Power cord
d Grip for two-handed carry