Controlled Products Systems Group 8360H Manuel d'utilisation
Capteur Controlled Products Systems Group

CONTENTS
Preparation . . . . . . . . . . . . . . . .2-3
Assembly . . . . . . . . . . . . . . . . .4-5
Installation . . . . . . . . . . . . . . . 6-13
Install the Door Control . . . . . . 14-16
Install the Protector System
®
. . 17-20
Power. . . . . . . . . . . . . . . . . . 21-22
Adjustments . . . . . . . . . . . . . 23-25
Battery Backup*. . . . . . . . . . . 26-27
Operation . . . . . . . . . . . . . . . . . 28
Features . . . . . . . . . . . . . . . . . . 29
Door Control . . . . . . . . . . . . . 30-31
Remote Control . . . . . . . . . . . 32-33
To Erase the Memory . . . . . . . . . 33
To Open the Door Manually . . . . . 34
Maintenance . . . . . . . . . . . . . . . 34
Troubleshooting. . . . . . . . . . . 35-36
Accessories. . . . . . . . . . . . . . . . 37
Warranty. . . . . . . . . . . . . . . . . . 38
Repair Parts . . . . . . . . . . . . . 39-40
* If applicable
PREMIUM Series
DC Chain Drive Garage
Door Opener with
Battery Backup
The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
■ Please read this manual and the enclosed safety materials carefully!
■ Fasten the manual near the garage door after installation.
■ The door WILL NOT CLOSE unless the Protector System
®
is connected and properly
aligned.
■ Periodic checks of the garage door opener are required to ensure safe operation.
■ The model number label is located on the front panel of your garage door opener.
■ This garage door opener is ONLY compatible with MyQ
®
and Security✚ 2.0™
accessories.
■ ONLY enable the Timer-to-Close* or MyQ
®
remote operation feature* when
the garage door opener is installed on a sectional door. (*Not available on all
models)
NOTE: If you are installing the garage door opener on a one-piece door, visit
www.liftmaster.com for installation instructions.
www.liftmaster.com
Serial Number:
Date of Purchase:
Model 8360
FOR RESIDENTIAL USE ONLY
Write down the following information for
future reference:
.
Document Outline
- English
- Owner's Manual (Chain Drive Model 8360)
- Preparation
- Assembly
- Installation
- 1) Determine the header bracket location
- 2) Install the Header Bracket
- 3) Attach the rail to the header bracket
- 4) Position the garage door opener
- 5) Hang the garage door opener
- 6) Install the light bulbs
- 7) Attach the emergency release rope and handle
- 8) Install the door bracket
- 9) Connect the door arm to the trolley
- Install the Door Control
- Install the Protector System®
- Power
- Adjustments
- Battery Backup
- Operation
- Features
- Door Control
- Remote Controls
- To Open the Door Manually
- Maintenance
- Troubleshooting
- Accessories
- Warranty
- Repair Parts
- Contact Information
- French
- Préparation
- Montage
- Installation
- 1) Déterminer l'emplacement du support de linteau
- 2) Fixation du support de linteau
- 3) Fixation du rail sur le support de linteau
- 4) Positionnement de l'ouvre-porte
- 5) Accrochage de l’ouvre-porte
- 6) Fixation des ampoules
- 7) Pose de la corde et de la poignée de déclenchement d'urgence
- 8) Fixation du support de linteau
- 9) Fixation de la biellette de la porte au chariot
- Pose de la commande de porte
- Pose le Protector System®
- Alimentation
- Réglages
- Pile de Secours
- Fonctionnement
- Fonctions
- Commande de Porte
- Télécommandes
- Ouverture manuelle de la porte
- Entretien
- Dépannage
- Accessoires
- Garantie
- Pièces de Rechange
- Pièces d’assemblage du rail
- Pièces pour la pose
- Pièces de l’ouvre-porte de garage - MODÉLE 8360
- Pièces de l’ouvre-porte de garage - MODÉLE 8365
- Coordonnées
- Spanish