ACR&Artex Auto Hemilight2 Manuel d'utilisation
Capteur ACR&Artex

5757 Ravenswood Road // Fort Lauderdale // FL // 33312-6645 // USA
Tel: +1 (954) 981-3333 // Fax: +1 (954) 983-5087 // www.acrartex.com
Auto
HemiLight™
2
Instructions
The Auto
HemiLight™
2
is a water-activated personal rescue light. The directions below are for mounting
the unit to a Personal Flotation Device (PFD)
. The Auto HemiLight™
2
fits up to a 2-inch (5 cm) webbing
strap.
Directions:
1.)
Place strap between the bottom of the Auto HemiLight™
2
and the convex side of the blue clip
2.) Snap blue clip into the
indentation of the Auto Hemilight™
2
to secure
Operating Instructions:
During normal use, leave the switch in the “ON” position. The light will automatically activate if it gets
wet. To disable the light, rotate
the switch to the ‘OFF” position.
NOTE: Once installed, the clip cannot be easily removed
Instructions:
1.)
Placez la sangle entre le bas du Auto HemiLight™
2
et la partie convexe du clip bleu
2.)
Refermez le clip sur la boucle de fixation afin de sécuriser
l’Auto HemiLight™
2
Instructions
d’opérations
Pendant usage normal, lésez le bouton sur la position «on». La lumière s’allumera automatiquement
quand mouillée. Pour désactiver la lumière, tournez le bouton a la position «off».
NOTE: Une fois installé, le clip ne peut pas être retirer
Product Number: 3768
Document: Y1-06-0256C
1
2