NEC ACCUSYNC 125F - Manuel (Page 14)

12
Specifications
Monitor AccuSync ™ 125F Notes
Specifications Monitor
Picture Tube Diagonal: 22 inch/55 cm 90 ° deflection, 0.24 mm grille pitch,
Viewable Image Size: 20 inch/51cm medium short persistence phosphor,
Radius: 50000 mm aperture grille CRT, G-WARAS coating
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal: 30 kHz to 96 kHz Automatically
Range Vertical: 50 Hz to 160 Hz Automatically
Resolutions Supported 640 x 480 @ 50 to 160 Hz Some systems may not support
Resolution based on horizontal and 720 x 400 @ 50 to 160 Hz all modes listed.
vertical frequencies only 800 x 600 @ 50 to 152 Hz
1024 x 768 @ 50 to 120 Hz
1152 x 870 @ 50 to 105 Hz
1280 x 1024 @ 50 to 89 Hz ......................... NEC cites recommended resolution at
1600 x 1200 @ 50 to 76 Hz
85 Hz for optimal display performance.
Active Display Area Horizontal: 396 mm/15.6 inches Dependent upon signal timing used,
(Factory Setting) Vertical: 297 mm/11.7 inches and does not include border area.
Active Display Area 406 mm/16.0 inches Dependent upon signal timing used,
(Full Scan) 305 mm/12.0 inches and does not include border area.
Power Supply AC 100 – 120 V / 220 - 240 V, 50/60 Hz
Current Rating 1.3A @ 100 – 120 V / 0.6A @ 220 - 240 V
Dimensions 495 mm (W) x 493.5 mm (H) x 473 mm (D)
19.5 inches (W) x 19.4 inches (H) x 18.6 inches (D)
Weight 29.7 kg
65.5 lbs
Environmental Considerations
Operating Temperature: +10 °C to +35°C/+50°F to +90°F
Humidity: 30% to 80%
Altitude: 3,000 m/10,000 Feet
Storage Temperature: -20 °C to +60°C/-4°F to +140°F
Humidity: 10% to 90%
Altitude: 15,000 m/50,000 Feet
NOTE: Technical specifications are subject to change without notice.
01.12.12, 8:43 12