Interface – Pioneer DVR-A03-J Manuel d'utilisation
Page 24
24
En
INTERFACE
9
0
-
~
=
Pin 1
Pin 1
Pin 1
Pin 1
REAR VIEW
Pin
Name
Function
1
L
Left channel audio output.
2
G
Ground.
3
G
Ground.
4
R
Right channel audio output.
Pin
Name
Function
1
MA
on The drive is used in master mode.
2
SL
on The drive is used in slave mode.
3
CS
on Using Cable Select function.
4
Reserved.
5
Reserved.
0 Audio Output
This is a connector for output of analog audio.
This connector is compatible with `Molex 70553`, choose a suitable connection cable.
Pin
Name
Function
1
+12
Power supply input for DC +12 V.
2
G
Ground.
3
G
Ground.
4
+5
Power supply input for DC +5 V.
- Device Configuration Jumper
Switch becomes ON when short socket is put.
Make sure the power of the drive is off before changing jumper setting.
Pin # 1 is ON at the time of shipping from the plant.
= Host IDE Interface
This is a 40 pin I/O connector according to the ATA specifications.
~ DC Input
Pin 1
Pin
Name
Function
1
GND
Ground.
2
Digital Out
Digital audio signal output.
9 Digital Audio Output
This is a connector for output of digital audio signal.