Philips HTB7150 - Manuel (Page 15)

15 EN
the TV to the correct source for your
home theater.
Set up the wired network
What you need
• A network cable (RJ45 straight cable).
• A network router (with DHCP enabled).
1
Using a network cable, connect the LAN
connector on your home theater to the
network router.
2
Press (Home).
3
Select [Setup], and then press OK.
4
Select [Network] > [Network
installation] > [Wired (Ethernet)].
5
Follow the onscreen instructions to
complete the setup.
• If connection fails, select [Retry], and
then press OK.
6
Select [Finish], and then press OK to exit.
• To view the network settings, select
[Setup] > [Network] > [View
network settings].
LAN
www
Set up the wireless network
Your home theater has a built-in Wi-Fi for easy
access to a wireless network.
What you need
• A network router (with DHCP enabled).
For best wireless performance, coverage,
and compatibility, use 802.11n router.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Network] > [Network
installation] > [Wireless (Wi-Fi)], and
then press OK.
4
Follow the onscreen instructions to select
and set up the wireless network.
• If connection fails, select [Retry], and
then press OK.
5
Select [Finish], and then press OK to exit.
• To view the network settings, select
[Setup] > [Network] > [View
wireless settings].
Personalize the network name
Name your home theater to easily identify it on
your home network.
1
Press (Home).
www