Philips PET707 - Manuel (Page 40)

3 PAC13X will automatically playback the video content
4 Power off all the devices after viewing
4.2 Volume control
Adjust the volume control on the right side of the player.
4.3 Screen brightness and contrast
1 Press DISPLAY repeatedly to set brightness or contrast.
2 Press 1 or 2 key to adjust the settings.
5 Troubleshooting
If it appears that the DVD-Video player is faulty, first consult this
checklist. It may be that something has been overlooked.
WARNING Under no circumstances should you try to
repair the set yourself as this will invalidate the guarantee.
If a fault occurs, first check the points listed, before taking the
set for repair. If you are unable to solve a problem by following
these hints, consult your dealer or service centre.
Symptom Remedy
No sound • Make sure that the system is properly
connected.
• Make sure the speakers are switched on.
• Make sure the audio source is correct.
No sound • Make sure that the LCD screen is
switched on and is in the correct video
mode.
• Make sure that your system connection
is properly connected.
• Make sure the video source is correct.