Pioneer KURO PRO-151FD - Manuel (Page 75)

75
En
04 Additional Picture and Sound Adjustment Options
When stereo sound is difficult to hear, manually switch to MONO for clearer sound. The panel’s sound remains
in mono even if the system receives a stereo broadcast. Reselect STEREO to hear broadcasts in stereo where
available.
Selecting MTS while the input source is INPUT 1 to INPUT 7 or a PC does not change the type of sound. In this
case, the video source determines the sound.
4.7.4 Apply Sound Effect Settings
Your flat panel TV offers four sound effects: SRS FOCUS, SRS, SRS TruBass and SRS Definition.
• SRS FOCUS TM moves sound source direction vertically and makes sound and voice clearly audible
• SRS
®
effortlessly produces a three-dimensional sound field
• SRS TruBass
®
produces a clear, rich bass tone
• SRS Definition ® improves midrange quality and clarifies voice and instrument sound
To activate one or more of the sound effects, follow the directions below.
1 ) Access the Sound through the Setup.
2 ) Select Sound Effect from the Sound menu.
3 ) Select a sound effect option.
(SRS FOCUS, SRS, SRS TruBass, SRS Definition)
4 ) Select Low (moderate), Mid (standard), High (enhanced) or Off for that option.
5 ) Press HOME MENU to exit the menu.
Note: How a Sound Effect changes the Audio depends on the signal.
(SRS WOW HD TM ) indicates that SRS FOCUS, SRS, SRS TruBass and SRS Definition are on.
4.7.5 Use Auto Volume Control (AVC)
Auto Volume Control, or AVC, reduces sudden volume change and compensates source sound level.
To select this option, follow the procedure below.
1 ) Access the Sound through the Setup.
2 ) Select AVC from the Sound menu.
3 ) Select On (or Off ).
4 ) Press HOME MENU to exit the menu.
PRO151FD.book Page 75 Wednesday, April 2, 2008 10:19 AM