Enlarging the image, Using an assigned function, Enlarging the image using an assigned function – Panasonic TQBJ0302 Manuel d'utilisation
Page 26: Remote control operation, Nglish, Press button, Button functions in digital zoom mode
Remote control operation
Basic Operation
26 -
E
NGLISH
Enlarging the image
You can enlarge the projected image down to a cen-
tered area for emphasizing within the range of 1× to 2×.
Press
button.
Press the
RETURN button to escape.
J
Button functions in digital zoom
mode
+ button: zooms in
- button: zooms out
Press “-”
Press “+”
Press ▲▼◄► to shift the center point.
Remarks
When the
z
COMPUTER signal is projected, the
enlargement range will be changed to 1× to 3×.
When
FRAME LOCK in the POSITION menu is set
to
ON, the enlargement range is 1× to 2×. However,
the enlargement range is 1× to 3× if
FRAME LOCK
is set to
OFF. (
When the input signal is changed while the
z
DIGITAL ZOOM is activated, the DIGITAL ZOOM
mode will be cancelled.
While the
z
DIGITAL ZOOM is activated, the AUTO
SETUP, FREEZE, DEFAULT, INDEX-WINDOW
and
FUNCTION (except when AV MUTE is
assigned) buttons are not available.
Using an assigned function
You can select a useful function from the list and
assign it to the
FUNCTION button for a short-cut.
Press
button.
Press the MENU button of the control
1 )
panel or remote control to display the
on screen menu (main menu, sub-
menu or detailed menu) .
For the menu operation, see “Navigating through
the MENU”. (
Press and hold the FUNCTION button
2 )
of the control panel or remote control
for 3 seconds or more.
When not using the FUNCTION button
Q
Select DISABLE in this menu
1 )
(FUNCTION BUTTON in the
PROJECTOR SETUP menu).
Press the ENTER button.
2 )
Select OK.
3 )
Press the ENTER button.
4 )
Remarks
For details, see “FUNCTION BUTTON” in the
z
“PROJECTOR SETUP menu”. (